9500 LBS Electric Winch UE-TRH99500-1

9500 LBS Electric Winch UE-TRH99500-1

Place of Origin:Shanghai,China(mainland)
Model Number:TRH99500-1
Application:Auto
N.W./G.W:33/34kqs

0086-13764058563

Product Information
Model
TRH99500-1
Capacity
9500 LBS
Package size
600x340x250 mm
N.W./G.W.
33/34 kgs
QTY/20'CY
540 PCS


Multiple application winch to raise or lower boats, sailboat keels, grain augers and more. Automatic brake holds load in position when handle is released. Rugged steel construction..
Solutions

• COMMON PROBLEMS AND SOLUTIONS

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.

Features

• Controlled freewheeling clutch and automatic brake

• Will accept wide strap

• Emergency crank handle is standard equipment

• Not for use as hoist for lifting, supporting or transporting people or for handling loads over areas • where people could be present


Copyright © 2018 Shanghai Youjia Trading Co.,Ltd. 沪ICP备20023335号-1 技术支持:逐鹿科技